Solar Micro Inverter 350W 230V MPPT Grid Connected IP55 Sine Waving Inverter for Small Solar Systems

About this item

• Feature: 1. Grid Connected: The solar power inverters are grid connected inverters, which need to be connected to the grid before they can be connected to household appliances 2. Wear Resistant: The solar power inverters is made of aluminum alloy, which is wear resistant and durable, and has a long service life 3. 0.2 to 1.6KW: The sine waving inverter is small in size, which is often used in small solar systems, with a capacity of 0.2 to 1.6KW 4. Use with Confidence: The solar micro inverter is a device that converts the direct current of the solar panel into alternating current 5. Pay Attention: The 350W solar inverters can only be used with solar panels, not with batteries, please pay special attention when using Specification: Item Type: Solar Micro Inverter Material: Aluminum Alloy Inverter Box Size: Approx. 13 x 7.7 x 3.7cm / 5.1 x 3.0 x 1.5in Photovoltaic Output (DC): Input Connector Quantity: 1 Set Maximum Input Power: 350W Maximum Input Current: 14A AC Output (AC): Rated Output Power: 320W Maximum Output Power: 350W Rated AC Frequency:50/60Hz Output Frequency Range: 50Hz: 47.5 to 52.5Hz/60Hz: 57.5 to 62.5Hz Output Power Factor: >0.99 Efficiency: The Highest Conversion Efficiency: 92.5percent MPPT: Tracking Efficiency: 99.9percent Night Loss: <700mW Temperature Range: -40 celsius to 65 celsius (ambient temperature)/-40 celsius to +85 celsius (storage temperature) Waterproof Grade: IP55 Communication: None Comprehensive Grounding: the PE End of the AC Cable is the Grounding Wire of the Device, and There is No Other Grounding Port.. Package List: 1 x Solar Micro Inverter1 x User Manual1 x AC Cable Note: This device can only be connected to solar photovoltaic modules as an input sourceThis equipment is a grid connected power generation equipment. It must be connected to the power grid and the power grid is working normally to generate electricity. When the power grid fails, the equipment will also stop generating powerBefore use, please make sure that the open circuit voltage VOC and working voltage VMP of the photovoltaic module are in line with the input voltage and working voltage range of this equipmentBefore use, please ensure that the maximum output power of the photovoltaic modules does not exceed the maximum input power of the deviceThe DC power of the photovoltaic modules will pass through this equipment, each circuit must be disconnected separately before maintenance or disassemblyPlease do not cover the device with any other objects. Please do not open the casing. The maintenance of this device needs to be carried out by professionalsWhen photovoltaic modules are connected to this equipment and exposed to sunlight, they will supply DC power to this equipment, please pay attention to safetyPlease do not install the device in a place where it can be exposed to direct sunlight or may be covered by rain and snow (such as the aperture between the two components should be avoided)