LED Intelligence Touch Induction Switch for Bathroom Mirror DC5?24V

About this item

• Feature: 1. Strong compatibility, wide range of application. 2. The product has power off memory function, convenient to use. 3. With a variety of working modes, choose freely. 4. With waterproof function, the waterproof grade is IP44. 5. The anti-interference ability is strong, can prevent the antenna of the transmitting device such as the interphone from being close to the interference. Specification: Item type: LED Induction Switch Condition: 100percent brand new Weight: Approx. 36g Color: As picture shown Working voltage: DC5-24V Induction method: touch type Quiescent current: 10ma Touch distance: <3mm (glass) Maximum load: 5A Waterproof grade: IP44 Working temperature: -20 degrees C - +50 degrees COptions: Single Output A1, Single Output A2, Single Output A3, Dual Output B1, Dual Output B2, Dual Output B3 This product is a veneer touch switch that can directly load LED lights and control relays. The combination of a full plastic case and side-illuminated backlight technology makes the product high-end and beautiful. Single output mode A1 1. In the white backlight state, short press to enter the brightness cycle adjustment, respectively 25percent -50percent -75percent -100percent off, in the off state, the backlight switches to blue. 2. In the blue backlight state, long press to turn off the blue backlight, short press to turn on the blue backlight. A2 1. Short press the switch light and press and hold for the stepless cycle dimming. 2. In the blue backlight state, long press to turn off the blue backlight, short press to turn on the blue backlight. A3 1. Short press the switch light, long press to turn off all lights. Dual output mode B1 1. In the white backlight state, the long press is the two-way stepless dimming mode, and the brightness can be adjusted from 5percent to 100percent . 2. In the state of white backlight, short press to adjust the brightness ratio of two channels can be cyclically adjusted. The ratio is divided into 5 stages, namely: 100percent : 0percent -75percent : 25percent -50percent : 50percent -25percent : 75percent -0percent : 100percent to turn off the light, then the backlight switches from white It is blue. 3. In the blue backlight state, press and hold again to turn off the blue backlight, short press to turn on the blue backlight. B2 1. In the state of white backlight, long press the stepless dimming mode, and the two lights will cycle in the fade-in and fade-out states. 2. Under the white backlight state, the short-pressing brightness ratio can be cyclically adjusted. The brightness ratio of the two lamps is from 40percent , 70percent , 100percent to off at the same time. At this time, the backlight switches from white to blue. If there is a state of extinction, short press cycle adjustment is only valid for the bright group. In the blue backlight state, press and hold again to turn off the blue backlight, and short press to turn on the blue backlight. B3 1. In the white backlight state, short press is the two-way switch switching mode, which is: the first way to open - the second way to open - the two way to open - close, in the closed state, the backlight switches to blue. 2. In any case, long press to turn off all lights directly. Package List: 1 x Touch switch1 x Buckle 1 x Instruction Note: 1. Please disconnect the power supply before installation to avoid potential safety hazards! 2. After the product is installed and energized, it cannot be squeezed by external force, otherwise the product will enter the self-test state. It takes 16S to work properly, or it can be powered off again. 3. The product waterproof rating is limited to the test after the installation is completed, and does not have waterproof function before installation. 4. The product is high-precision sensitive electronic product, please do not open the product without authorization.