Battery Active Equalizer Balancer Energy Transfer Board Accessory Part for NCM LFP LTO6S

About this item

• Feature: 1. This active equalizer can be applied in ternary lithium battery, lithium iron phosphate battery, and LTO battery. 2. Adopting ultra low internal resistance MOS and premium Printed Circuit Board to ensure efficient balance effect. 3. The working voltage is 1.8V to 4.2V, and the balance current is 0 to 5.5A, the better the balance, the smaller the balance current 4. When the voltage is lower than 3.0V, it will automatically stop and enter the dormant state, and the standby power consumption is less than 0.1mA. 5. The transfer is carried out by means of the internal energy transfer of the battery and the balance of the entire battery pack, and no external power supply is required. Specification: Item Type: Battery Active Equalizer Material: Printed Circuit Board Function: Suitable for NCM battery, LFP battery, LTO battery. Sleep Current: <0.1MA Balance Current: 05.5A Working Environment Temperature: 10 60 celsius .. Parameter Model 6S 7S 8S Applicable Serial Number 56s 67s 78s Applicable Battery Type NCMLFPLPO Single Voltage Working Range NCMLFP: 3.04.2V LTO:1.83.0V Voltage Balance Accuracy 5mv(typical) Balance Mode The entire battery participates in the active balance of energy transfer at the same time. Undervoltage Protection Sleep Voltage NCMLFP: 3.0V LTO:1.8V Quiescent Working Current 9mA 9mA 9mA Package List: 1 x Battery Active Equalizer1 x Connecting Cable Note: The quiescent current is about 9 mA, and it is recommended to be used for batteries with a battery capacity of 60?300 AH. This active equalizer can be applied in ternary lithium battery, lithium iron phosphate battery, and LTO battery. Adopting ultra low internal resistance MOS and premium Printed Circuit Board to ensure efficient balance effect. The working voltage is 1.8V to 4.2V, and the balance current is 0 to 5.5A, the better the balance, the smaller the balance current When the voltage is lower than 3.0V, it will automatically stop and enter the dormant state, and the standby power consumption is less than 0.1mA. The transfer is carried out by means of the internal energy transfer of the battery and the balance of the entire battery pack, and no external power supply is required.