3.2 Inch Baby Monitor with Cradle Lullaby and Two-Way Audio Intercom Infant Care Monitor for Watching Over Your Baby blue

About this item

• Image Sensor: Inch1/7-inch CMOS GC0308 Camera pixels: pixels640*480 Field of viewing angle(Field of viewing angle)Degree(°)60°(Horizontal test) Minimum illumination(Night Vision)Lux>5(IR OFF)/<2(IR ON) Night Vision Distance(IR Range)m3~5 Main Control (CPU) Song Han Chip SN93331C Video Resolution 640 x 480P/15fps(max) Video Code Rate bps32kbps-3Mbps Audio Compression (Audio Compression) PCM Audio Transmission) Two-way voice intercom (Half Duplex) Sound Sensitivity (Sound Sensitivity) dBm-47dBm Alarm Mode Voice detection Wireless Transmission Way 2.4GHz FHSS+GFSK Transmission Range (Transmission Range)m200m in the sight Interface Type-C Power Supply VDC5V 1.5A Working current mA480(max) Main control (CPU) Song Han chip SN93330C Screen size 3.2 inches Screen descriptionDetailed picture quality Resolution 320*240 Video input support 1 way Audio input built-in microphone Interface: 1 Type-C power connector, 1 power switch, 1 menu key, 1 left, right, up and down arrow keys, 1 confirmation key, 1 shortcut key, 1 intercom key, 1 switch key, 1 Vox shortcut key Power Supply VDC5V 1A Working current (working current) mA450(max) Built-in lithium battery 1500mAh Operation Temperature/F10º ~+55º Storage Temperature)℃/F-20º ~+60º Operation Humidity)RH15% ~85 Effective image size : 8.12 inches Standby Power : 150mh Operating Temperature : 10℃ Type : LCD Supply Voltage : 5V1A Brightness : 300 Refresh Rate : 60 Frequency : 2400hz Box Size: L144xW112xH134MM Weight (600g) Functional Description. 1. audio and video wireless transmission. 2. Half-duplex two-way voice intercom. 3. 3. Transmission video resolution is 640*480. 4. 4. With PTZ rotation function. 5. 3.2 inch display with 320*240 resolution. 6. Camera built-in lullaby. 7. Camera power failure alarm, indicator light flashing and Beep sound. 8. camera with sound detection function, can light up the dormant receiver, while the indicator light flashes and Beep sound. 9. Support IR CUT, support for night vision, night vision distance of 3 meters. 10. Lens viewing angle greater than 60 degrees (horizontal test) 11. IR switching requirements: IRCUT / IE LED start / shutdown threshold 14. receiver support power saving mode, with automatic hibernation function, hibernation time four blocks: 1 minute, 5 minutes, 10 minutes, off. 15. receiver with lullaby playback function, can play 5 lullabies. 16. receiver with ZOOM function, can magnify the video image 2 times 17. Receiver with temperature display function, can display the temperature data transmitted wirelessly by the camera. It can switch between Celsius and Fahrenheit. 18. Receiver with low battery reminder function (specifically refers to the receiver lithium battery low battery) 19. When the receiver has no signal, the indicator light flashes and beep sound is emitted. 20. receiver with lithium battery, capacity 1500mAh. 21. 21. Charging time is 2 hours, working time is 5-6 hours. 22. 22. Receiver add camera by pair code way. 23. Wireless transceiver distance is more than 200 meters (open without interference, within the visual range). 24. alarm function; camera power failure alarm (indicator light buzzer) 25. When the LCD is dormant, if there is sound from the camera side, it can detect and light up the LCD. A. Brief description of the functions of the camera side 1. Audio and video capture: the device side to capture audio and video. 2. Setting mode: the receiver adds the camera by code pairing. 3. Working mode: When the camera enters the working mode, the receiver can receive audio and video signals wirelessly. Infrared light automatically turns on at night (940 wavelength light). Camera built-in temperature sensing module. B. Brief description of the functions of the receiver side (3.2-inch screen) 1. audio and video playback: the receiver side to play the collected audio and video. 2. set the mode: the receiver through the receiver to play the collected audio and video. 2. Setting mode: the receiver adds the camera by code pairing. 3. 3. working mode: the receiver can accept the audio and video signals from the camera when it enters the working mode. Remote Pan Tilt Zoom 360-View Baby Room No APP and WiFi Reliable and secure connection