600W Buck MPPT Solar Charge Controller 10?30V Adjustable Solar Panel Regulator with LCD Display

About this item

• Feature: 1. Solar Charge Controller: Adopts MPPT maximum power point tracking technology to realize the maximum energy tracking of solar panels, so that it can be used in any environment. It can quickly and accurately track the maximum power point of the solar cell, obtain the maximum energy of the solar panel in real time, and significantly improve the energy utilization rate of the solar system. 2. MPPT Maximum Power Point Tracking Technology: MPPT tracking efficiency can reach 99percent . High efficiency synchronous rectifier circuit structure. Maximum output power is 600W. Input voltage is 17?84V. Output voltage is 10?30V. The maximum efficiency is 97percent . The output voltage can be set. 3. LCD Display: Support lithium, lithium iron phosphate and other battery types. Support lithium battery activation. HD LCD display of input voltage, output voltage and output current. Intelligent temperature control, fan heat dissipation. With perfect undervoltage, overtemperature, short circuit, output overcurrent, overload, anti backflow protection mechanism. Adopt aluminum radiator and high temperature derating treatment to ensure reliable and efficient operation in various working environments. 4. Over Temperature Protection: When the internal temperature exceeds 100 celsius , the output power will be reduced. If it up to 110 celsius , the output will be automatically turned off and over temperature will be displayed. When temperature is lower than 85 celsius , it will automatically resume work. When temperature exceeds 65 celsius or the charging current is greater than 30A, the wind will be automatically turned on, and temperature is lower than 45 celsius , the controller will automatically turn off the fan. 5. Safe To Use: With Intelligent protection against overcurrent, short circuit, inverse, low voltage, and overcharge, this solar charge controller will help you improve the system efficiency safely and prolong the life span of the battery. Specification: Item Type: Solar Charge Controller Material: Aluminum Weight: Approx. 1236g / 43.6oz Product Size: Approx. 17.1x13.8x4.7cm / 6.7x5.4x1.9in Protection Level: IP66 Noise: < 55dB Power: 600W Photovoltaic Input Tracking Voltage: Minimum 17V, Maximum 84V Maximum Output Voltage Vo: Minimum 10V, Rated 13.8V, Maximum 30V Maximum Output Current: Conditions: 600V, Rated 600/Vo (Unit A), Maximum 600/Vo Or 43 (Unit A) Conditions: 12V System, Rated 40A, Maximum 43A Conditions: 24V System, Rated 20A, Maximum 22A No Load Loss: Rated 0.5W-0.8W Voltage Adjustment Rate: Rated 1percent Load Adjustment Rate: Rated 5percent PWM Conversion Efficiency: Rated 97percent MPPT Efficiency: Rated 99.5percent Heat Dissipation Mode: Rated Intelligent Air Cooling Charging Mode: Rated Constant Voltage, Constant Current Internal Temperature Protection: Rated 110 celsius Working Environment Temperature: Full Load, Minimum -40 celsius , Maximum 65 celsius Storage Temperature: Minimum -40 celsius , Maximum 125 celsius Application Environment: 1. In A Dry, Clean And Ventilated Environment. 2. Keep Away From Direct, Humid, And Acidic Environments. 3. Avoid Dust When Using. 4. The Distance Between The Machine And The Controller Should Be Greater Than 0.5 Meters. 5. Do Not Use In Inflammable And Explosive Environment. Beware Of Flame And Spark. 6. Ambient Temperature: -20 celsius -60 celsius 7. The Maximum Humidity Is Below 85percent . (-25 celsius -50 celsius ) Uses: Solar Power Generation, Outdoor Energy Storage Power Supply, RV Backup Power Supply, Household Appliances, Lighting, Digital Products, Solar Toy Car. Package List: 1 x Solar Charging Controller 1 x Manual 2 x Junction Box Note: 1. Installation equipment should be a professional operation, or by the local distributor to assist complete. 2. Input line and output line to distinguish and prevent wrong.3. The positive and negative to correct, battery, voltage should be consistent with the machine type.4. Do not expose the device to damp, flammable and explosive dust or harsh environments, such as large accumulation, do not cover and block.5. Equipment surrounding air gap to set aside more than 10 cm. In order to have good heat dissipation.