Solar Panel WiFi Camera 1080P 2MP PIR Motion Detection 2 Way Audio Cloud Storage IP67 Water

About this item

• Feature: 1. Solar Rechargeable Battery Power: 1.3W monocrystalline silicon solar panel, built in li battery, the total capacity is up to 6400mAh, it can be charged in any weather. 2. PIR Motion Detection: Motion within 7 meters will trigger the camera to activate and send an alert to all mobile phones that add devices. 3. 2 Way Audio: The solar camera has a built in MIC and speaker. When watching a video, you can press and hold the microphone button to communicate with others. 4. Wide Angle: Wide viewing angle 120 degree lens, 4x digital zoom; 8 infrared LEDs, night distance of 25 meters. 5. Device Sharing: P2P remote technology, support multi user viewing, QR code sharing or adding devices, one mobile APP can add 16 devices. Specification: Item Type: Solar Security Camera Wireless WiFi Frequency: 2.4 GHz IEEE802.11b, 802.11g, 802.11n Draft: Supported 5.0 GHz: Not supported Main Control Sensor: 1080P main control+lngenic T31ZL+2063 Video Resolution: Mainstream: 1920x1080 At 15fps, Substream: 640x360 at 15fps Video Recording: Compression format H.265, video format MP4 Lens: 4mm F2.0 low light; wide viewing angle 120 degrees; 4x digital zoom LED: 8 infrared LEDs, night distance 25m/82.02ft Audio Compression: G.726/AAC. Audio Bit Rate: 8Kbps, 16bit Audio Input And Output: Built in MIC and speaker, support two way intercom PIR Motion Detection: Support up to 7m/22.97ft PIR detection range Alarm Linkage: Alarm recording to memory card; alarm mobile phone message push Video Storage: Memory Card: Maximum support 128G memory card. Support cloud storage (open for 30 days, and then need to renew) Recording Mode: PIR Alarm Recording Video Playback: Support App to play and download videos remotely Power Supply: Solar Panel: 1.3W monocrystalline solar panel Battery: 2 x Li Batteries (included), total capacity up to 6400mAh Working Mode: Low power working mode Wake up Method: PIR motion detection wake up, remote App wake up Sleep State: When the alarm ends or the remote connection is disconnected Power Consumption Sleep Standby Power: 0.03W; Work: 1.3W at daytime/3W at nightvision Power Input: DC5V 2A Use Environment: Environment -20 celsius -+60 celsius (-4 Fahrenheit -+140 Fahrenheit ), humidity 10percent -80percent Shell Material: ABS plastic material, water resistant grade IP67. Package List: 1 x Camera1 x Bracket1 x Antenna16 x Screw4 x Expansion Tube1 x Needle1 x Screwdriver1 x USB cable2 x Battery1 x Manual Note: 1. Do not place the product in an environment that is too corrosive, humid and high temperature!2. Please supply power according to the voltage used. Using other voltages may cause fire and product damage!