Joystick Controller with NFC Function Left and Right Gamepad for Switch Console Accessories

About this item

• Feature: 1. It can be connected to the host through the slide rail, or connected to the host through wireless Bluetooth. 2. It is easy to operate. The game handle can be separated to control the game independently, or the left and right handles can be inserted into the host computer for simultaneous use. 3. Vibration motor, 6‑axis gyroscope, NFC function, and supports simultaneous connection of 7 joystick controllers (4 left‑hand controllers and 3 right‑handed controllers or 3 left‑handed controllers and 4 right‑handed controllers) 4. The controller consists of 22 buttons and 2 3D joysticks: the left controller consists of up, down, left, right, screenshot key, SL key, SR key, unlock key,‑key, L key, ZL key and the left stick. 5. The right controller consists of A button, B button, X button, V button, + button, Home button, SL button, SR button, unlock button, R button, ZR button and right joystick. Specification: Item Type: Joystick Gamepad Material: ABS Successful Connection Current: <30mA Controller Vibration Current: <80mA Controller Sleep Current: <15uA Controller Charging Current: <350mA Maximum Charging Input Charging Voltage: DC5V Bluetooth Control Range: 8-10m 26.2-32.8ft Controller Battery Usage Time; with vibration <10H, without vibration less than 20H Built-In Battery: Polymer Lithium Battery 400mAh How to Use: 1. Host settings Turn on the main unit, select Not set from the menu, and then select system settings -airplane mode - controller connection , and then turn on Bluetooth 2. The host is connected via Bluetooth A. Press any button on the left controller to make the 4 LEDs of the control handle flash. B. Press and hold the Mode button of the left controller or the right controller for 3 seconds, and the LED light will continue to flash and enter the Bluetooth self-pairing mode. C. Return to the main screen of the host, select the ControllerController menu on the screen, and then select Switching Controller Mode . The host will automatically adapt to the matching controller. After successfully connecting the gamepad, press the Close button. Then enter the menu to enter the game. 3. Automatic reconnection When joystick and the host are separated, press any button to wake up the controller, the controller 4 LEDs will flash cyclically, and the host controller will not be connected for 5 seconds to enter the sleep mode (when the controller is separated from the host, you can reset it by pressing the Home button) Even the host). When the controller is connected to the host through the slide rails on both sides of the host and enters the dormant state, the host can be awakened by long pressing the Home button. 4. Turn onoff and charge the controller A. Turn onoff the controller (1) Press any left or right button to turn on the controller When the controller is turned on, the 4 LEDs will flash cyclically. Press and hold Mode for 3 seconds to enter the pairing mode. Release the button when the LED flashes rapidly and the LED will be steady on when the pairing is successful. (2) After connecting to the host, press and hold Mode again: 3 seconds to turn off the power to the controller. (3) In the pairing mode, if the 60 grit is not successfully paired, the handle will automatically enter the standby state. (4) When connected, short press the Mode button to turn off the handle. B. Controller charging mode (1) In the standby state, when charging the controller via USE, the 4 LEDs flash slowly at the same time, and the 4 LEDs are off when it is fully charged. (2) When the controller is plugged into the host, it can be charged via the host controller or via USB (when the host is not charged, the controller can still be charged when the host battery voltage is lower than 3.7V) 5. How to reset the controller Can t be in the serial broadcast, you can reset it by pressing the Mode button 6. Gravity sensor calibration Place the controller flat on the desktop, press 5R+ mode to turn on the controller, and then LED 1 and LED 2 will light up. Then calibrate according to SL. PS: Please note that the controller must be placed horizontally on the desktop. 7. 3D calibration Connect to the host computer, select Settings-Handle and Sensor-Calibrate the gyroscope sensor, press the button according to the host s prompt, and the host will prompt after the handle is leveled and the calibration is completed. 8. Interface description The USB interface can charge the controller and upgrade the controller program, To avoid damaging the console, it is forbidden to charge the controller through the USB port when the controller is plugged into the game console. 9. Upgrade the controller program If the host system is upgraded, the controller may also need to be upgraded through the USB port. 10. Support wired function Insert the controller into the host, it will automatically connect to the host via wired connection, and the Bluetooth connection will be automatically closed. When the controller is out of power, the host will automatically charge the controller.. Package List: 1x Charging Cable1 x Manual2 x Joystick Gamepad Note: Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.