DCDC Power Converter Voltage Step Up 12V to 24V 3A 72W IP67 Automatic Overvoltage Protection

About this item

• Feature: 1. Equipped with automatic protection functions such as overcurrent, overvoltage, overheating, short circuit and so on. 2. When the protected circuit is an unsafe value, the built?in protector automatically cuts off the circuit, and resumes normal operation when the value returns to the normal range. 3. Designed to be potted with organic silica gel, waterproof, dustproof and anti?vibration, use at ease, bring you more convenience. 4. Comprehensive protection, perfectly suitable for use in various harsh environments, and more stable and reliable. 5. Suitable for surveillance cameras, printers, electric fan, water pump, industrial electrical equipment of various corresponding voltages, etc. Specification: Item Type: Power Regulator Material: Organic Silica Gel + Aluminum Input Voltage Range: DC920V Output Voltage: 24V Rated Output Current: 3A Output Power: 72W Protection Level: IP67 Conversion Efficiency: Up to 96percent Working Temperature: 20 celsius to +80 celsius Installation Line Length: Approx. 13cm5.1in Application: For LED car display, surveillance camera, electric fan, water pump, motor, photovoltaic energy numerical control equipment, water pump, router, ADSL cat, switch, LED light, digital photo frame, electronic refrigerator, portable DVD, audio, security system, portable tool, printer, Network equipment, various industrial electrical equipment corresponding to voltages, etc.. Package List: 1 x Power Regulator Note: 1. In order to ensure the normal operation of the converter within the input voltage range, the input voltage must not be lower than the minimum or maximum input value restricted by the product during use. The input voltage value must be higher than the output voltage value by more than 2V. If there is no voltage difference of 2V, the output The value will be lower, but it will not damage (affect) the use of the converter.2. The input current must be greater than or equal to the required power of the output load device (for example, if the power of the load device needs to be 100W, then the input power must be greater than or equal to 100W). When the converter is in use, the current of the load device should not be greater than the maximum current value that the converter can withstand, and leave as much margin as possible for the converter to ensure that the converter works normally and achieves the highest conversion efficiency.3. The positive and negative poles of the converter cannot be reversely connected during use. Reverse connection may cause damage to the converter. It is recommended to add a suitable fuse to the input terminal during use.4. When there is no load, the chip works in light load mode, and the output voltage may vary within a certain range.Equipped with automatic protection functions such as overcurrent, overvoltage, overheating, short circuit and so on. When the protected circuit is an unsafe value, the built?in protector automatically cuts off the circuit, and resumes normal operation when the value returns to the normal range. Designed to be potted with organic silica gel, waterproof, dustproof and anti?vibration, use at ease, bring you more convenience. Comprehensive protection, perfectly suitable for use in various harsh environments, and more stable and reliable. Suitable for surveillance cameras, printers, electric fan, water pump, industrial electrical equipment of various corresponding voltages, etc.