Air Gripper Pneumatic Cylinder Parallel Style Finger Small Manipulator for SMC Robot MHC2?10D

About this item

• Feature: 1. Eight Shaped Air Claw: Eight shaped air claw is made of good quality stainless steel material, hard and durable 2. Hard Oxidation: Hard oxidation on the surface of the cylinder body, wear resistant and corrosion resistant 3. Accurate Hole Spacing: Nickel plated circlips are formed at one time, come with accurate hole spacing and good airtightness 4. +0.02mm Repeat Accuracy: Finger claw is 2 finger claws, repeated accuracy for +0.02mm, maximum frequency of use is 180c.p.m 5. Double Acting: Air gripper pneumatic cylinder use air fluid, the pressure is 0.15?0.6MPa, and the action mode is double acting Specification: Item Type: Air Gripper Pneumatic Cylinder Product Material: Aluminum alloy + stainless steel + brass + bearing steel + polyurethane rubber + NBR + resin Product Model: MHC210D Finger Claw: 2 Claws Bore Diameter: Approx. 10mm 0.39in Use Fluid: Air Pressure: 0.150.6MPa Action Mode: Double acting Environment And Fluid Temperature: 10~60 celsius Repeated Accuracy: +0.02mm Maximum Use Frequency: 180c.p. m. Package List: 1 x Air Gripper Pneumatic Cylinder Note: 1. When installing accessories to finger claws, please avoid twisting fingers. Otherwise will cause gaps or deterioration of accuracy.2 Please adjust and confirm to avoid external force on your fingers. Repeatedly subjecting the fingers to lateral loads or impacts may cause gaps or breakage of the fingers. In order to prevent the workpiece or accessories from colliding, please set a gap at the end of the stroke of the air movement.3 When inserting a workpiece, please perform center alignment sufficiently to avoid applying external force to fingers. Particularly during trial operation, please check whether it is shocked by hand movement or lowering the cylinder pressure and operating at a low speed.4. The opening and closing speed of the fingers exceeds the necessary value, and the fingers or accessories may cause gaps or damage due to inertia. Therefore, please install the speed control valve to avoid impact. Eight Shaped Air Claw: Eight shaped air claw is made of good quality stainless steel material, hard and durable Hard Oxidation: Hard oxidation on the surface of the cylinder body, wear resistant and corrosion resistant Accurate Hole Spacing: Nickel plated circlips are formed at one time, come with accurate hole spacing and good airtightness +0.02mm Repeat Accuracy: Finger claw is 2 finger claws, repeated accuracy for +0.02mm, maximum frequency of use is 180c.p.m Double Acting: Air gripper pneumatic cylinder use air fluid, the pressure is 0.15?0.6MPa, and the action mode is double acting