14mm 24 Teeth Brass Worm 1.5 Modulus Brass Worm Gear Wheel for Motor Drive Gears

About this item

• Feature: 1. The 24 tooth brass worm gear should be used with a stainless steel worm. The combination of this 24 tooth brass worm and the stainless steel worm that drives it creates a very compact, high torsion and robust 24:1 gear reduction ratio. 2. The combination is self locking and can realize reverse self locking, that is, only the worm can drive the worm wheel, but the worm wheel cannot drive the worm, so that the motor does not need to continue to apply torques to maintain the load. 3. It has a modulus of 1.5 and a center hole Diameter of 14mm. It has a robot common hole grid pattern. There is a circular slot on one of the end faces of the gear, which is conducive to not changing the strength of the gear. Greatly reduce the weight of the gear. 4. It can avoid the interference of the protrusion of the screw head used to install the fixed gear, and ensure the flat surface of the installation. If the circular slot affects the assembly, then we can flip the gear and usethe other side of the gear to assemble. 5. The other side of the brass worm gear is a flat surface, this ingenious design facilitates the installation and fixation of the worm gear and expands the use range of the worm gear. Specification: Item Type: Brass Worm Material: Brass Model: 430900140024 Center Aperture: Approx. 14mm0.6in Number of Teeth: 24 Module: 1.5 Purpose: Motor Drive Gear. Package List: 1 x Brass Worm The 24 tooth brass worm gear should be used with a stainless steel worm. The combination of this 24 tooth brass worm and the stainless steel worm that drives it creates a very compact, high torsion and robust 24:1 gear reduction ratio. The combination is self locking and can realize reverse self locking, that is, only the worm can drive the worm wheel, but the worm wheel cannot drive the worm, so that the motor does not need to continue to apply torques to maintain the load. It has a modulus of 1.5 and a center hole Diameter of 14mm. It has a robot common hole grid pattern. There is a circular slot on one of the end faces of the gear, which is conducive to not changing the strength of the gear. Greatly reduce the weight of t It can avoid the interference of the protrusion of the screw head used to install the fixed gear, and ensure the flat surface of the installation. If the circular slot affects the assembly, then we can flip the gear and usethe other side of the gear to a The other side of the brass worm gear is a flat surface, this ingenious design facilitates the installation and fixation of the worm gear and expands the use range of the worm gear.