Remote Control Relay Switch 12V Single Way Wireless Remote Control Switch for Access Control

About this item

• Feature: 1. SCOPE OF APPLICATION: Wireless switch remote transmitter is suitable for electrical control circuits for burglar alarm, remote control of electric doors and window, signal control, industrial control, lifting equipment, etc. 2. INDEPENDENT OUTPUT: Wireless remote control switch is ideal for direct control of all types of loads, and the remote control switch module relay contacts independent output, making it very easy to use. 3. LEARNING CODE WIRELESS ENCODING TECHNOLOGY: Relay wireless remote control uses learning code wireless coding technology (spaced to code), no directionality, and the switches do not interfere with each other. 4. WORKING METHOD: It is recommended to use a DC regulated power supply of 500mA or more. Working mode is self locking, interlocking, pointing user free adjustment, can realize a control more or more control one. 5. DIRECTLY DRIVE DC OR AC LOAD: Wireless relay remote control can directly drive DC or AC loads, the receiver board can withstand 10A current per circuit, each relay with a set of normally open (normally closed) contacts. 6. THOUGHTFUL TIPS: Remote control relay switch is not recommended to control high power loads, control 220V less than 500W per road, control 12V less than 50W per road, to extend the service life of the receiver board. Specification: Item Type: Remote Control Relay Switch Material: ABS Pair Code Mode: Learning Type Working Voltage: DC12V Remote Control Distance: Approx. 50-100m 164.0-328.1ft Modulation Mode: ASK Amplitude Modulation Remote Control Built In Battery: 2 x CR2016 (75mAh). Package List: 1 x Remote Control Switch Module1 x Plastic Box1 x Remote Control1 x Double Sided Sticker Note: 1. Please do not operate with electricity, you should turn off the power for operation, test to make sure it is correct and then power on to use.2. When the remote control voltage is insufficient, please replace the battery in time (when the remote control battery voltage is insufficient, the general remote control distance becomes closer).3. When using wireless electronic products should pay attention to avoid metal masks, large electronic equipment, electromagnetic fields and other strong sources of interference to avoid the remote control and the receiving distance is short or can not work properly.4. Do not use this electronic product abnormally. Abnormal use will reduce the performance and life of the product, serious damage to the product will also bring your safety risks.Interlock learning to code method:Press and hold the learning key for about 3 seconds, the learning indicator of the remote control socket interface will light up, release it, and immediately press any key on the remote control.Press any key on the remote control (or open lock key), and then press another key on the remote control (or close lock key), the learning indicator light will flash three times and then go out in gray, indicating successful learning.Clear the code: (Please clear the code first when you need to change the working mode and then pair the code)Long press the learning key on the remote socket interface for about 8 seconds, the learning indicator light will go out from light to light, which means the code is cleared successfully.