Andoer · SKU 3271

Features: 3.5mm jack, for iPhone, iPad, some Andriod devices, computer and loudspeaker. High sensitivity, high dynamic, wide frequency response. 360 degrees rotary clip allows you to easily clip it to your collar, tie or pocket. A foam cap protects your mic from wind noise and spit. Portable an exquisite, the cable is about 1.5m. Great for audio, video recording and hands-free mic speaking. With a small bag to store and carry the mic. Specification: Type: Condenser Microphone Frequency range: 20Hz-16KHz Sensitivity: -30dB +/-2dB RL=2.2k Ohm VS=3V Plug socket: 3.5mm Cable length: Approx. 1.5m / 5ft Package size: 11.5 * 8 * 1 / 4.5 * 3.1 * 0.4in Package weight: 29g / 1oz Package List: 1 * Clip-on microphone 1 * Foam cover 1 * Small bag

Andoer · SKU 3502

Features: Made of aluminum alloy, very sturdy and durable. Max load capacity is 15kg / 33.1lbs. 2 built-in spirit levers design, meeting your meeting your requirements for precise shooting direction. The elongated quick release plate on the top makes increase of its contact area with camera, which makes your camera more stable. 3 all-metal locking knobs. With 3/8 screw hole on the bottom and a 1/4 -3/8 adapter screw, the ball head is suitable for most of tripods on the market. With standard 1/4 screw on the quick release plate, various brand cameras, mirrorless cameras and pocket camera can be mounted on it. 36mm large sphere provides tight locking force for ensuring enough stabilization and safety of your camera. It is suitable for general photography. In addition, 360 degrees panning movement with calibrated precision for 360 degrees panoramic shooting. Specifications: Brand: Manbily Model: KB-0 Material: Aluminum alloy Color: Black Max Load Capacity: 15kg / 33.1lbs Sphere Diameter: 3.6cm / 1.4in Ball Head Height: 10.5cm / 4.1in Quick Release Plate Size: 6 * 3.8cm / 2.4 * 1.5in Item Weight: 396g / 13.97oz Package Size: 9.5 * 9.5 * 10.5cm / 3.7 * 3.7 * 4.1in Package Weight: 450g / 15.9oz Package List: 1 * KB-0 Ball Head 1 * Adapter Screw(1/4 Female to 3/8 Male)

Igeteck · SKU 883

Features: YN300-II adopts 300 high-quality LED light beads of extra-large luminous chips, the brightness is higher, the light spot is more evenly and the service life is longer. The color temperature of YN300-II can be adjusted from 3200-5500k, which meet your needs of more shooting situations. YN300-II adopts the encoder digital dimming which can be separately adjusted do rough dimming and fine dimming modes, more convenient to use. The infrared remote controller is configured,thus the brightness and power switch can be adjusted away from the machine. Adopted the professional LED driving chip,the light is stable and the efficiency achieves 93%. The camera light can be mounted on the camera as well as used by a handle. Four color temperature plates are configured and suitable for using under different environments. Compatibility: Almost all the SLR cameras camcorders, like Canon Nikon Pentax Olympus Samsung Panasonic JVC and so on. Except Sony & Minolta(It needs hot shoe adaptor to use the LED light). Compatible Batteries(Not included): Sony NP-F series, NP-F750, NP-F550, NP-F950/B, NP-F530, NP-F970, NP-F970/B, NP-F570, NP-F770, NP-F960, NP-F930, NP-F930/B, NP-F950, NP-F330 Specification: Model: Yongnuo YN-300 II Light Source: 300 LED beads Color Temperature: 3200K-5500K Color Rendering Index: Y90% Power: 18W Lumen: 2280 LM Luminance Angle: 55 Average Service Life: 50000 H Remote Control Distance: <8M/ 26.3ft Light Size: 173 * 153 * 43mm/ 6.8 * 6.0 * 1.7in (Without sunshade open) Light Weight: 353g/ 12.5oz Package Size: 20 * 17 * 6.5cm/ 7.9 * 6.7 * 2.6in Package Weight: 792g/ 1.75Lb Package list: 1 * Yongnuo YN-300 II LED Video Light 4 * CT Filter (Blue, Red, White, Orange) 1 * Storage Bag 1 * Handle 1 * Remote Controller 1 * Mini Base 1 * Hot-shoe Mount 1 * Manual

Koogeelife · SKU 5810

GoolRC B6 is a high-performance, micro processor control charge/discharge station with battery management suitable for various types of lithium batteries. With integral equalizer for 6s LiPo, LiFe and LiLon batteries. Maximum 5A charge current and maximum 50W charge power. It can be powered by 11-18V DC source. Features: Optimized operating software. Internal independent lithium battery balancer. Balancing individual cells battery discharging. Adaptable to various type of lithium battery. Fast and storage mode of lithium battery. Various connectors to charge different batteries. Specifications: Brand: GoolRC Input: DC 11-18V Circuit power: 50W(max charge), 5W(max discharge) Charge current range: 0.1-5A Discharge current range: 0.1-1A NiMh/NiCd cells: 1-15S LiPo/Lilon/LiFe cells: 1-6S Pb battery voltage: 2-20V Temperature sensor port: Yes Size: 132 * 85 * 26mm Weight: 212g Package Information: Package size: 16.5 * 15 * 4.5cm / 6.5 * 6 * 1.8in Package weight: 355g / 12.5oz Brand gift box package NOTE: This charger does NOT come with an AC adapter. You should purchase adapter with a corresponding plug. Package List: 1 * GoolRC B6 Balance Charger 1 * DC Cable with Alligator Clip Charging Connector 5 * T plug Charging Cable

GoolRC · SKU 798

Four Operation Modes: 1. All LED is on 2. For the front LED light, white LED is flashing quickly, blue LED is always on. For the back LED light, white LED is always on, yellow and red lights are flashing quickly 3. For the front LED light, the white and blue lights are flashing in the highest speed frequency in a loop. For the back LED light, the white, yellow, red lights are flashing inthe highest speed frequency as well 4. For the front LED light, the white LED is always on, the yellow LED is flashing slowly. For the back LED light, the white and yellow lights are flashing at the same time, and they are flashing with RED LED alternatively Features: 12-LED flashing light system for RC Car Multicopter Qudcopter Helicopter Dimensions (Control Box): 47* 30* 12mm Input Voltage: 4.8 - 6V DC Working Current: 100mA LED Wire: 350mm Control Wire: 280mm Power Core Connection Wire: 200mm Item size: 22 * 12 * 3cm / 8.7 * 4.8 * 1.2in Item weight: 90g / 3.2oz Easy to install and operate Package Includes: 1* Control box 6* White LED light 2* Blue LED light 2* Yellow LED light 2* Red LED light 12* Car LED holder 1* Power connection cable 1* Control connection cable

Koogeelife · SKU 1956

Description: Brand Name: Hobbywing Item Name: Hobbywing SkyWalker 60A UBEC ESC Constant Current: 60A Burst Current (>10s): 80A BEC Mode: switch mode BEC Output: 5V at 3A Battery Cell: 2-6 cells Lipo,or 5-18 cells NiHH Refresh Rate: 50Hz-432Hz Dimension: 77 x 35 x 14 mm Weight: 63g Maximum speed: 210000 RPM (2 poles motor), 70000 RPM (6 poles motor), 35000 RPM (12 poles motor). Features: Safety Arming Feature: Regardless the throttle stick position, the motor will not spin after battery connected. Throttle Calibration: Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters. Selectable program setting Full Protection Features: Low voltage cutoff protection / Over-heat protection / Throttle signal lost protection. Package size: 10 * 10 * 5 cm / 4 * 4 * 2 in Package weight: 62 g / 22 oz Package List: 1 * Hobbywing SkyWalker 60A Brushless ESC

VehicleKit · SKU 2821

This Car Light is special for RC car models, with All kinds of flashing mode, totally simulate the lights system of real cars. Suitable for 1/10 1/8 Climbing car Rally car Monster truck short-course truck CC01 D90 SCX10 4WD model car and etc. Features: All kinds of flashing mode. Totally simulate the lights system of real cars. Smart operating system the vast majority of RC Cars remote control system. The LED status directly from the RC transmitter linkage control without addding any ancillary equipment, convenient and reliable. The LED system lighting effects with conventional operating mode, night mode, fog mode, emergency mode. The system contains 4 combo the burst flash mode(such as strobe light, breathing light, cruise light). The system channel CH2(TH) positive and negative phase intelligent set free to switch lights each mode transnitter linkage. Suitable for 1/10 1/8 Climbing car Rally car Monster truck short-course truck CC01 D90 SCX10 4WD model car and so on. Specification: Item Number: AX-003 The use of voltage:4.8~6V The use of current:100mA Servo extension cable length: 32cm The use method: power line directly connect to receiver to enter normal mode, when black control panel connect to main control box, pressing the black control panel's button to enter night fog emergency mode. LED cable length: 30cm Dimensions: 49*32*16mm/ 1.92 * 1.25 * 0.62in Weight: Approx.50g (1.76 oz) Package information: Package size: 14 * 8 * 2cm / 5.5 * 3.1 * 0.78in Package weight: 55g / 1.94 oz Package List: 1 * AX-003 Car Light 1 * English operating manual

TOMTOP JMS · SKU 5557

This original R pin set is suitable for WLtoys K989 RC Car. It's a good replacement for RC fans. Its high quality and durable performance can bring lots of racing joy. It's light and very tight to tighten the plastic cover to the body frame of your car. Definitely best choice for your K989! Features: 100% original new. Easy to install and replace the old one. Very tight to tighten the plastic cover to the body frame of your car. Specially suitable for WLtoys K989 RC car. Very light weight and portable to carry. Specifications: Brand name: WLtoys Item name: R Pin Pin Type: 12*0.7 Material: Metal Suitable for: WLtoys K969 K979 K999 K989 RC Car Item dimension: 12 * 0.7 * 0.7mm / pcs Item weight: 1g Package information: Package size: 10 * 6 * 0.5cm / 3.9 * 2.4 * 0.2in Package weight: 8.5g / 0.3oz Poly bag package Package List: 10 * K989 R Pins

TOMTOP JMS · SKU 6565

This is a set of professional and practical LED lights for 1/10 1/8 RC cars, which includes 6pcs LEDs: 2pcs white LEDs, 2pcs red LEDs and 2pcs blue LEDs. They are powered by the receiver directly, very convenient to use. Features: Durable hard metal lampshade. LED size: 5mm (white and red LED), and 3mm (blue LED). Directly powered by the receiver, for convenient to operate. Including 6pcs LEDs: 2pcs white LEDs + 2pcs red LEDs + 2pcs blue LEDs. Suitable for 1/10 1/8 Traxxas HSP Redcat RC4WD Tamiya Axial SCX10 D90 HPI RC Car. With stable performance, it is practical and durable. Specification: Item name: 6 LED Light Kits Material: Plastic & metal Light color: 2 White, 2 Red, 2 Blue Using method: connects to extra channel on receiver Suitable for: 1/10 1/8 Traxxas HSP Redcat RC4WD Tamiya Axial SCX10 D90 HPI RC Car LED size: 5mm (white and red LED), and 3mm (blue LED) Cable length: about 650mm (artificial measurements error allowed) LED quantity: 6pcs Item weight: 24.7g Package Information: Package size: 9 * 8 * 2cm / 3.5 * 3.1 * 0.8in Package weight: 29g / 1.0oz Polybag package Package List: 1 * 6 LED Lights

Koogeelife · SKU 7480

This 12 LED Lighting System Kit is suitable for 1/10 RC cars. It have four colors lights, include white headlights, blue taillights, red brake lights and yellow turn lights. With improved circuit board, it can support High-V receiver and normal receiver. And one set of lights can be controlled by the transmitter. Features: 12 LED lights Simulation car light Simple and easy to use Far flashing, super bright Improved design of circuit board, HOSI power saving Headlight white, blue taillight, brake light red, turn light yellow Suitable for 1/10 RC cars Specifications: Name: 12 LED Lighting System Kit Material: Plastic LED bulb quantity: 12 Working Current: 100mA Input voltage: 4.8V - 6.0V Lights color: White, red, yellow, blue Connection method: CH1 - Servo CH2 - Speed controller CH3 - Receiver Suitable for: 1/10 RC cars LED cable length: about 300mm Circuit board size: 53 * 33 * 15mm Weight: 57.2g Lights Description: Headlights: 4 white LED lights Connect the lighting system to the CH3 on receiver: the transmitter can independently control a group of lights, another group of lights are on when the car speed up; Not connect to the CH3 on receiver: one group of lights are always on, another group of lights are on when the car speed up. Turn lights: 4 yellow LED lights With the remote control change the direction, the lights will synchronous flashing. Taillights: 2 blue LED lights, 2 red LED lights The blue lights are always on. When the car speed up or brake, blue lights will go out. Only when brake, the red lights on. Installation Method: CH2 Transmitter: Connect the plug of servo and ESC to the CH1 and CH2 on lighting system, and then connect the CH1 and CH2 to receiver. CH3 Transmitter: Connect the plug of servo and ESC to the CH1 and CH2 on lighting system, and then connect the CH1, CH2 and CH3 to receiver. Package information: Package size: 16 * 7 * 4cm / 6.3 * 2.8 * 1.6in Package weight: 60g / 2.1oz Polybag package Package List: 1 * 12 LED Lighting System Kit

Automobile and motorcycle supplies · SKU 614

20cm/7.9 PC VGA SVGA to S-VIDEO 3 RCA TV AV Converter Cable Adapter Features: High quality cable to convert VGA to S-Video / RCA AV signal. With 1 standard Sub-D VGA input on one end, 1 S-Video mini 4-pin connector and 3-RCA jack on the other end. It will work with laptops and desktops with VGA cards that has TV-Out function capability through the VGA connector. Note: Please be sure to the Video Card of your system supports TV (RCA/S-Video) output through VGA port. Not every video card will work with this adaptor. Only certain video cards which have TV Output function built into VGA port will work through this adaptor. Specifications: Cable color: White Material: Pure copper + PVC Length: 20cm / 7.9 Connectors: 1 * Standard VGA connector 15-pin male 1 * S-Video mini 4-pin female 3 * RCA jack female (yellow plug for video and red / white plugs for L/R audio) Weight: 63g / 2.2oz Package list: 1 * VGA SVGA to S-VIDEO 3 RCA TV AV Converter Cable Adapter

Headecoration · SKU 2852

With ezcap music digitizer, you can easily convert your old analog music to MP3 and save it into USB drive or SD card without computer. It can automatic partition each songs of all the music. You just need to plug USB driver or SD card in then press Record button, the device will convert all music on your device in MP3 format automatically. You can also press playback to check files on it, or put USB drive or SD card to other place( computer, speaker, etc) to play them. Features: Capture all audio signals and save it as MP3 files in a USB flash drive or SD card. No computer required. t can automatic partition each songs of all the music. Playback function can make you check the recorded music on device. At the same time, you could connect a earphone to the LINE OUT port to listen the music that recording. Power on ezcap241 with 5V DC(most USB port supply 5V DC). 3.5mm and 2 RCA audio input selection. Support most audio and multimedia devices which has 3.5mm or RCA audio port, such as phones, cassette players, DVD, game consoles , phonograph and other equipments. With remote controller, you can get all the functions like record, stop, playback, pause, previous, next and volume control, etc. Specification: Storage: USB drive, SD card Audio Input: 3.5mm audio, 2 RCA L/R audio Audio Output: 3.5mm audio Converter Format: MP3 Bit Rate: 128Kbps User Interface: Record button, IR remote control, LED for working status Power Supply: Mini USB port power supply( 5V DC, USB from PC) Item Size: Approx. 6.5 * 5.9 * 2.3cm / 2.56 * 2.32 * 0.91in Item Weight: Approx. 53g / 1.86oz Package Size: Approx. 15 * 10.8 * 4cm / 5.91 * 4.25 * 1.57in Package Weight: Approx. 185g / 6.53oz Package List: 1 * ezcap Music Digitizer 1 * USB Cable 1 * Remote Controller 1 * User Manual 1 * 3.5mm Cable